
VisionPlus pH630 is a rugged, easy to use, IP67 rated pH tester with temperature readout. ?Key features include IP67 rated body, automatic temperature compensation, up to 3 point calibration and replaceable electrode module. ?Available in degrees Celsius and degrees Fahrenheit models.
This pH tester is RoHS compliant.
Features
- Automatic temperature compensation
- 1, 2 or 3 point calibration
- Stores calibration data
- Replaceable electrode module
- High noise resistance
- Simultaneous display of pH and temperature
- Large temperature range
- Dedicated button for data hold
- Low battery indicator
- IP67 rated body for water-proof and dust-proof
- RoHS compliant
General
- pH buffer recognition pH 7.00, 4.01, 10.01 or pH 6.86, 4.00, 9.18
- pH temp compensation: AUTO from -9.9 to 99.9 ¡ãC (14.2 ¡ãF to 212 ¡ãF)
- pH buffer recognition: Selectable US (4.01, 7.00, 10.01) or NIST (4.00, 6.86, 9.1)
- pH Electrode Offset recognition: ¡à100 mV at pH 7.00, 108.3 mV / -91.7 mV at pH 6.86
- pH Electrode Slope recognition: ¡à30% at pH 4.00, 4.01, 9.18 and 10.01
- Input impedance: >10exp(12) Ohms
- Temperature sensor: Thermistor, 10k Ohms at 25¡ãC
- Temperature unit: Factory pre-set
- Power: LR44 x 4 Battery life: ~200 Hours
- Ambient temperature range: 0.0 to 50.0 ¡ãC
- Display(pH/TEMP): pH:7.43 mm high, TEMP:5.74 mm high
- Case: IP67 water-tight case
- Weight: 105 g
描述
pH630为耐用、使用简易pH/温度测试笔。IP-67机身,自动温度补偿,高达3点校正,具可替换式电极程序。可切换华氏与摄氏温度单位,本产品通过RoHS认証。
- 自动温度补偿
- 1~3点校正
- 可储存校正资料
- 可替换式电极程序
- 高亢燥
- 可同时显示pH&温度
- 温度范围广泛
- 资料保留按键
- 低电量指示
- IP-67规格防水防尘、机身
- 本产品符合RoHS认証
产品规格
酸碱度计范围
0.00 ~ 14.00 pH
酸碱度计分辨率
0.01 pH
酸碱度计精准度
±0.01 pH
温度 范围 (°C)
-9.9 ~ 99.9 °C
温度 分辨率 (°C)
0.1 °C
温度 精准度 (°C)
± 0.3 °C
温度 范围 (°F)
14.2 ~ 99.9 °F ; 100 ~ 212 °F
温度 分辨率 (°F)
0.2 °F ; 1 °F
温度 分辨率 (°F)
± 0.6 °F ; ± 1 °F
pH缓冲液识别
US(4.01,7.00,10.01) 或 NIST(4.00,6.86,9.18)
pH 温度补偿
自动补偿范围自 -9.9 ~ 99.9 °C (14.2 °F ~ 212 °F)
pH 缓冲液识别(可选择)
可选择 US (4.01, 7.00, 10.01) 或 NIST (4.00, 6.86, 9.1)
pH 电极零点(offset)识别
于 pH 7.00 为 ±100 mV,于pH 6.86为108.3 mV / -91.7 mV
pH 电极斜率(slope)识别
于pH 4.00, 4.01, 9.18 、 10.01为±30%
输入阻抗
>1012 ohms
温度传感器
热阻器,于25°C 时为10k Ohms,10K Ohms (25°C)
温度单位
预设
电源供给
LR44 电池4颗
寿命
200小时
工作温度
0.0 ~ 50.0 °C
显示(pH/温度)
pH:7.43 mm,温度:5.74 mm
外壳
IP67规格防水外壳
重量
105 g